Fan lamp manufacturers

• 2022-08-09
  Is it practical to use fan lights in the restaurant of the new house?

  1. The fan lamp is very comfortable to use, especially when the temperature of the head of the person rises during the meal. At this time, the air circulates a little, which is naturally more comfortable. Even if there is an air conditioner, it cannot be replaced. It is recommended to install the air conditioner and the fan lamp together;2. The energy saving effect is obvious. It can reduce the use of refrigeration and air conditioners when alternating between cold and heat. It can be used in co
• 2022-08-09
  What are the ways to use the fan light?

  1. In fact, the fan and the light are controlled separately, each with a zipper, the middle zipper is for controlling the light, and the side zipper is for adjusting the fan gear. , and so on. The zippers are long enough. The zippers attached to the ceiling fan are all 50cm long, so don't worry.Fan lamp manufacturers2. There is a push switch on the lamp holder. Push the handle to the bottom. The fan rotates forward, that is, the wind blows downward. It is used in summer. When it is pushed to
• 2022-05-13
  Where is the performance of the fan light mainly reflected?

  The performance of the fan light is mainly determined by two factors, the motor and the fan blade structure.- Choice of motorThe motor is the core component that affects the performance of the fan. Some fan lights are not durable, and the problem is the quality of the motor.A good fan light motor generally uses a silicon steel motor with pure copper winding coils. The electric current is smooth and smooth when the motor is running, the motor friction is small, the noise is small, and the service
• 2022-04-21
  How to code the fan light remote control and related matters needing attention

  Many families will install ceiling fan lights, which are not only beautiful, but also very powerful. The fan light needs to use the remote control, so how to match the fan light remote control? Next, let the fan light manufacturer Magic Electric take you to solve this problem.1. How to code the fan light remote control1. First find the pairing button on the remote control, press and hold the button for about 5-10 seconds, then the red light on the remote control will light up by itself.2. The re
• 2022-03-20
  Fan light installation method and height

  When summer rolls around, I'm sure many homes still use ceiling fans, especially in the South, so they combine lighting and cooling. If you want to install a fan light in your home, remind everyone that the height of the space must be high enough, otherwise it may be dangerous. Let's take a look at the installation method and height of the fan light.First, the installation method of ceiling fan lights1. Put the ball into one end of the boom and hang it up.2. Route the motor wires through
• 2022-01-18
  Self-service fan light maintenance--fan turns, light does not light

  My own fan light, the switch is always sizzling, the light is flashing or not on, the fan is running. After my own maintenance, the switch controls the power supply and lights, and the remote control controls the fan, and the results are satisfactory.Fan lamp manufacturersThe lights in my house have only one switch and a remote control. The remote control can control the lights and fans. The steps are as followsOne, determine whether the light is good? First cut off the power supply, remove the
• 2022-01-18
  Correct steps for fan light installation

  The fan light is a combination of electric lights and ceiling fans, and it is still difficult to install. So, how should the fan light be installed? Fan lamp manufacturer magic to understand the correct steps for fan lamp installation.fan light1. Lock the two screws here to avoid shaking or noise after installation.2. When installing the blade, first fix the blade on the leaf hairpin, and then fix the connected blade and the leaf hairpin on the motor in turn.3. Install the lamp. When installing
Home Previous 1 Next Last